Korg Digital Piano Concert NC-300 User Manual download pdf (Page 9)

Getting Ready to Play

Getting Ready

■ Connect the power.

Connect the socket end of the AC power cord to the piano’s AC IN

connector. Then plug the other end of the power cord into a wall power

outlet.

■ Raise the keyboard cover. (NC-500 only)

Lift the front edge of the cover near the center of the keyboard, and

slide the cover all the way back into the cabinet.

To close the cover

: Lift the cover in the same location, and gently pull

it all the way out. Lower the front edge of the cover.

Be careful to avoid snagging your hand or your fingers when opening or

closing the cover.

Handle the cover gently and don't try to force it. The cover may break if

mishandled.

Before raising the cover, be sure that there are no small objects (such as coins

and paper debris) resting on it. Such objects can fall inside the piano when

the cover is lifted.

■ Turn on the power.

Press the POWER switch to turn the power on.

The selected SOUND button, the BANK button, and various other buttons

on the front panel light up.

To turn the power off:

Press the POWER switch once again.

Turning the power off returns all settings to their factory defaults. The NC-

500’s recorder memory will retain any song data that has been recorded.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

No comments

Korg Digital Piano Concert NC-300 User Manual Page 9