Korg SP-500 User Manual Page 66
- Page / 87
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
66
3. Using the pedals
Damper pedal settings for Layer
and Split
You can specify whether the damper pedal effect
will apply to one or both sounds when you use the
Layer or Split functions.
1
Press the [FUNCTION] switch
2
Access the “Func 3/10” page
Press the [PAGE ®] switch twice to
access the “Func 3/10” page.
3
Make the desired settings
If you select off the “Upp1” check box,
the damper will not apply to Upper 1.
If you select off the “Low/Upp2” check
box, the damper will not apply to Upper
2 or Lower.
If you change rhythm styles, this will change
to the setting that is stored in the newly-
selected rhythm style. (☞p.46)
4
Return to the main page
Press the [EXIT] switch to return to the
main page.
Specifying the function of the
assignable switch
A variety of functions can be assigned to a pedal
connected to the Assignable Switch jack.
With the factory settings, this is set to “Soft.”
1
Press the [FUNCTION] switch
2
Access the “Func 3/10” page
Press the [PAGE ®] switch twice to
access the “Func 3/10” page.
3
Change the “Assignable Switch”
setting
Use the dial or the [VALUE] switches to
select the function that you want to con-
trol from the pedal connected to the
Assignable Switch jack.
Soft The soft pedal of a piano
Start/Stop [STRAT/STOP] or [PLAY/STOP]
Sync Start Same function as the [SYNCHRO START/
STOP] switches
Acc Reset Same function as the [ACC RESET]
switches
Intro/Ending1 Same function as the [INTRO/ENDING 1]
switches
Intro/Ending2 Same function as the [INTRO/ENDING 2]
switches
Fill1 Same function as the [FILL 1] switches
Fill2 Same function as the [FILL 2] switches
Variation 1 Select “1” for the “Variation” Cell
Variation 2 Select “2” for the “Variation” Cell
Variation 3 Select “3” for the “Variation” Cell
Variation 4 Select “4” for the “Variation” Cell
Bass Inversion Turn the “Bass Inv.” cell on/off
Scale Change Switch between “Main Scale” and “Sub
Scale” (☞p.65)
Variation Up Select next variation
Variation Down Select previous variation
Reverb On/Off [REVERB] switch, on/off
Effect On/Off [CHORUS etc.] switch, on/off
Drum Mute Mute Drum part of automatic accompani-
ment (☞p.40)
Perc. Mute Mute Perc. part of automatic accompani-
ment (☞p.40)
Bass Mute Mute Bass part of automatic accompani-
ment (☞p.40)
Acc1 Mute Mute Acc1 part of automatic accompani-
ment (☞p.40)
Acc2 Mute Mute Acc2 part of automatic accompani-
ment (☞p.40)
Acc3 Mute Mute Acc3 part of automatic accompani-
ment (☞p.40)
Tap Tempo Same function as the [TAP TEMPO]
switches
Ensemble Same function as the [ENSEMBLE]
switches
Quarter Tone Used in middle-eastern music. The pitch
will be adjusted by +50 cents for notes
played while the pedal is on (or adjusted by
–50 cents if the pedal is pressed twice).
Press the pedal once again to cancel.
- Data handling 2
- Table of Contents 3
- Introduction 7
- 3. Main features 8
- Touch control 9
- Temperaments 9
- Pitch adjustment (Transpose) 9
- Touch-View LCD screen 9
- 4. Panel layouts 10
- Rear panel 11
- Operating panel 12
- Preparations for playing 13
- Using the music stand 14
- Turning the power on 14
- Adjusting the volume 14
- Basic operation 15
- 2. Operating panel 16
- 3. Help function 17
- Move through the pages 18
- To exit Help 18
- Demo playback 19
- Start demo playback 20
- Start the demo playback 21
- Specify the “Tempo” 21
- Playing the SP-500 23
- 2. Selecting sounds 24
- Select a program 25
- 3. Combining sounds 26
- Return to the main page 27
- Press the [SPLIT] switch 27
- Select each sound 27
- Adding Reverb to the sound 29
- Select the type of effect 30
- Starting the metronome 31
- Adjusting the tempo 32
- 6. Using pedals 33
- 7. Changing the touch 34
- Changing the program name 35
- Automatic accompaniment 37
- Selecting a rhythm style 38
- Press the [START/STOP] switch 38
- Adjusting the overall volume 40
- Muting a part 40
- 2. Various automatic 41
- Changing how you specify the 42
- Performing with an ensemble 42
- To change the variation 43
- Adding an intro 43
- Adding an ending 44
- Adding a fill 44
- 3. Using the [USER] rhythm 45
- 4. Creating a custom 46
- Custom style parameter list 47
- Recording 49
- Specify the time signature 50
- Start recording 50
- 2. Various recording 53
- Auto punch-in/out 54
- Recording) 55
- Traditional 56
- 3. Editing functions 57
- “Event Edit” page 58
- “Bounce Track” page 60
- “Insert Measure” page 60
- “Delete Measure” page 60
- “Initial Edit” 60
- Functions 63
- 2. Selecting a temperament 64
- Selecting a temperament 65
- Creating your own temperament 65
- 3. Using the pedals 66
- 4. All setup 67
- 5. Convenient functions 68
- Connecting other equipment 69
- Local on/off setting 70
- Synchronizing to an external 71
- MIDI Transpose 71
- MIDI Filter 71
- Layer and Split”) 72
- Appendices 73
- Specifications 74
- Program list 75
- ストリングスブラス /クァイア 76
- Rhythm style list 78
- Drum kits list 81
- Demo songs list 83
- List of detected chords 84
- MIDI Implementation Chart 86
Related products and manuals for Sequencer Korg SP-500
Sequencer Korg ES-1 User Manual
(64 pages)
(64 pages)
© 2020, manymanuals.com. All rights reserved. | 0.335 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals