Korg KAOSS PAD KP3 User Manual download pdf (Page 13)

14

4. If you want to record a one-shot sample,

press the same SAMPLE BANK button be-

fore reaching the specified BEAT. Sam-

pling will end, and a one-shot sample will

be created. The SAMPLE BANK button

used for recording will light red. It will be

easier to record a one-shot sample if you

specify a longer setting such as “16.”

5. If the specified BEAT time elapses before

you press the SAMPLE BANK button,

sampling will end, and a loop sample will

be created. The KP3 will automatically

switch to playback, and the SAMPLE

BANK button will light orange.

NOTE The data that had been in the selected

SAMPLE BANK button will be overwritten.

Playing back samples

The SAMPLE BANK buttons will light

green if they contain a loop sample or red

if they contain a one-shot sample. Keys

that contain no sample data will be dark.

When you press a button that contains a

loop sample, loop playback will start. The

button will be lit orange during playback.

Press the button once again to stop play-

back.

When you press a button that contains a

one-shot sample, the button will momen-

tarily go dark and the one-shot sample will

play.

NOTE If a sample effect is selected for the program,

playback will begin when you touch the touch pad

after selecting a SAMPLE BANK button.

Sample playback levels

If you want to adjust the sample playback

volume for all banks, use the level slider.

Adjusting the level of an individual

sample bank

1. Hold down the SHIFT button and press

the desired SAMPLE BANK button; the

button will blink green.

2. The pad LEDs corresponding to the se-

lected bank (i.e., located above the button)

will display a bar graph, and LEDs above

the remaining banks will indicate their re-

spective level points.

3. Touch the pad to adjust the playback

level of the sample for that bank.

Editing playback settings for

loop samples

To edit the playback settings for a loop

sample, hold down the SHIFT button and

press a SAMPLE BANK button that con-

tains a loop sample.

NOTE If you press a SAMPLE BANK button that

contains a one-shot sample, you won’t be able to edit

settings other than the level.

Start Point setting

1. The SHIFT button will be lit and the

specified SAMPLE BANK button will

change to blinking green.

The display will show the loop start point

setting.

2. Use the PROGRAM/BPM knob to ad-

just the start point in steps of 1/32nd of a

beat, over a range of ± 1 beat.

Slice setting

Loop samples can be sliced into equal

parts. You can select whether each sliced

part will play or not play. Sliced parts that

do not play are skipped, so the overall

length of the loop will be made shorter.

This allows you to create a variety of new

rhythmic figures and loops from the same

original data. For example by playing only

the first two beats and last two beats of a

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 74 75

Comments to this Manuals

No comments