Korg KAOSS PAD KP3 User Manual download pdf (Page 18)

cate “End.”

Press the SHIFT button to return to normal

operation.

NOTE You won’t be able to save if the SD card is

protected.

Never turn off the power or remove the SD card

while saving or formatting. Doing so may render

the SD card unusable.

Loading from card

Here’s how to load previously-saved data

from the card.

1. Hold down the SHIFT button and press

the PROGRAM MEMORY 2 (LOAD) but-

ton.

2. Use the PROGRAM/BPM knob to select

the type of data that you want to load.

“SMP.A”–”SMP.D”: Sample data

“Snd.A”–”Snd.D”: WAVE, AIFF

“ProG”: Contents of program memory

“ALL”: All files

“GLOb”: Global setting file

3. Turn the PROGRAM/BPM knob to see

the file numbers that are available for load-

ing; 00–99 for each of the sample bank but-

tons, 00–09 for all other data types.

Use the PROGRAM/BPM knob to select

the file number you want to load.

If you’re loading a WAVE file or AIFF file,

select the desired file.

NOTE In the case of WAVE files or AIFF files, the

KP3 will recognize only file names consisting of a

two-digit number plus filename extension, such as

“00.wav” or “99.aif”. If both .wav and .aiff files

with the same two-digit number exist, the WAVE

file will take priority.

NOTE WAVE files and AIFF files will be loaded as

loop samples. You can resample a loop sample and

capture it as a one-shot sample by stopping the re-

cording before it stops automatically. Then you can

save the one-shot loop as a KP3 sample and always

use it as a one-shot.

4. Use the PROGRAM/BPM knob to select

“yes.” Press the PROGRAM/BPM knob to

load the data. When loading is completed,

the display will indicate “End.”

Press the SHIFT button to return to normal

operation.

MIDI functions

What is MIDI?

MIDI stands for Musical Instrument Digi-

tal Interface, and is a world-wide standard

for exchanging a variety of performance-

related information between electronic

musical instruments and computers.

About the MIDI implementation chart

The owner’s manual of each MIDI device

includes a “MIDI implementation chart.”

This chart lets you check the types of MIDI

message that can be transmitted or re-

ceived. When you use two (or more) MIDI

devices together, compare their MIDI

implementation charts to see which types

of MIDI message they are able to transmit

and receive between themselves.

* Details on the MIDI functionality are provided in

the separate MIDI implementation. To obtain the

MIDI implementation, please contact Korg dis-

tributor.

MIDI connections

Commercially available MIDI cables are

used to transmit and receive MIDI mes-

sages. Connect these cables between the

MIDI connectors of the KP3 and the MIDI

connectors of the external MIDI device

with which you want to transfer data.

MIDI IN connector: This connector re-

ceives MIDI messages from another MIDI

device. Connect it to the MIDI OUT con-

nector of the external device.

MIDI OUT connector: This connector

transmits messages from the KP3. Connect

it to the MIDI IN connector of the external

device.

NOTE If you connect the USB connector to your

computer and install the USB MIDI driver, the

USB connection will transmit and receive the same

MIDI messages as the MIDI connectors.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 74 75

Comments to this Manuals

No comments

Korg KAOSS PAD KP3 User Manual Page 18

Comments to this Manuals