Korg MR-1 User Manual download pdf (Page 8)

9. Power button (with Hold function)

This turns the power on/off (shutdown). By sliding this button to the HOLD position, you

can prevent accidental operation from occurring when you inadvertently touch the buttons

or the P-dial.

10. Menu button

This button accesses the menu list (MENU) screen, allowing you to choose the information

or parameters that will be displayed. Each time you press this, you will alternate between

the level meter screen and the menu screen. You can also use this button to return from an

editing screen to the previous screen.

11. P-dial

This is a dial with a push-switch function. For more about how to operate it, refer to "Screens

and operations" on the next page.

12. Volume buttons

These adjust the volume of the headphone jack.

Top panel

13. Headphone jack (stereo mini)

You can connect a set of headphones here.

14. Output jack (stereo mini)

The audio is sent out from this jack.

15. Mic power switch

This switch supplies power (+3V) when using a plug-in power type mic. Turn this on if

you're using the included mic (CM-2M).

You must leave this off if you've connected a line input or a dynamic type mic. Leaving this

switch on could damage your mic or line input device.

16. Input switch / Input jacks L, R

Select either the MIC (mic input) or LINE (line input) position as appropriate for the device

that's connected to input jacks L and R.

You can use either balanced or unbalanced devices (→p.15).

MR1_Text1_E.p65 06.11.22, 11:59 AM8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

No comments

Korg MR-1 User Manual Page 8