Korg LP-380-73 User Manual download pdf (Page 11)

Touch settings

The keyboard sensitivity, or touch, can be programmed.

To change the seing, hold down the TOUCH buon and

press the UP or DOWN buon beside the display.

Loud

Loudness

Quiet

Loud

Playing

strength

Light

Normal

Heavy

Display

Touchsensitivity

1 Light. Loud notes can be produced even by

playing lightly.

2 Normal. Normal piano touch.

3 Heavy. Loud notes can be produced only by

playing very hard.

When the instrument is turned on, the touch seing is

reset to Normal.

The seings are applied to all sounds.

Transpose

In some cases, a song may be wrien in a dicult key (e.g.,

many black keys), or you may wish to shift the pitch to

match another instrument or vocalist. In such cases, you

can transpose (shi the pitch) so that you can use an easier

fingering, or use the same familiar fingering to play at a

dierent pitch. This is called the Transpose function.

You can shift within a range of 11 semitones (10 semi-

tones*) so that when transposing upward by one semitone,

playing the notes shown at the left produces the pitches

shown at the right.

When the instrument is turned on, the transposing is

reset.

While holding down the TRANSPOSE button, press the

keyboard key (F#6–F7(E7*)) for the desired transposition.

If a keyboard key other than C7 is pressed, the TRANS-

POSE button lights up to indicate that the keyboard is

transposed.

The pitch of the entire keyboard is transposed according

to the pitch of the pressed keyboard key in relation to C7.

To return to the original pitches, hold down the TRANS-

POSE buon and press the C7 key. The TRANSPOSE but-

ton turns o, and transposition is canceled.

* refers to the 73-key version.

F 6

E7*

73-key version

Other functions

key Eect

6–B6 6–1 semitones below

C7 Standard pitch

7–F7(E7*) 1–5(4*) semitones higher

Function mode

The temperament as well as other pitch settings can be

specied from the Function mode.

SeingprocedureforfunctionsintheFunctionmode.

1. PresstheFUNCTIONbuon.

The FUNCTION and PIANO1 buons light up.

2. Pressthesoundbuoncorrespondingtothedesired

function.

The current seing appears in the display.

3. Specifythedesiredseing.

4. After specifying the desired settings, pressthe

FUNCTIONbuontoreturntothemodeforplaying.

The FUNCTION buon turns o.

1,4

When the LP-380 is turned off, all functions, except

the auto power o function, return to their default set-

tings.

The seings are applied to all sounds.

Fine tuning

In order to adapt the LP-380 pitch to that of another instru-

ment, you can adjust the pitch in steps of 0.5 Hz over a

range of A4 = 427.5–452.5 Hz

27.5–52.5 appears in the display.

The standard pitch is A = 440 Hz, and the default seing is

40.0.

1. WhenyouentertheFunctionmode,thePIANO1

soundbuonlightsup.

When the Function mode is entered, the pitch seing

normally appears.

2. Tospecifythepitchaerchangingotherseingsin

theFunctionmode,pressthePIANO1buon.

3. SpecifytheseingwiththeUPorDOWNbuonbe-

sidethedisplay.

Simultaneously press the UP and DOWN buttons to

return to 440 Hz.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

Comments to this Manuals

No comments

Korg LP-380-73 User Manual Page 11

Comments to this Manuals

Related products and manuals for Musical Instruments Korg LP-380-73