Korg LP-380-73 User Manual download pdf (Page 13)

Specifying layer pedals

In the Layer mode, a damper seing can be specied for

each sound.

The seings are only for the layer 1 sound (o – –), only for

the layer 2 sound (– – o) and for both sounds (o – o).

The default seing is o – o.

1. EntertheFunctionmode,andthenpresstheVIBES/

GUITARbuon.

The VIBES/GUITAR sound button lights up, and the

damper seing (o – o) appears in the display.

2. SelectthedamperseingwiththeUPorDOWNbut-

tonbesidethedisplay.

If the sound is in the Single mode, – – – appears in the

display, and a seing cannot be specied.

Specifying the auto power off function

When 30 minutes have passed without a key pressed on

the keyboard or without an automatic performance played,

the instrument is automatically turned o. To disable this

function, turn o (oFF) this function. The default seing is

this function turned on. If this seing is changed, the new

seing is saved and remains selected, even if the LP-380 is

turned o.

1. EntertheFunctionmode,andthenpresstheOR-

GAN1buon.

The ORGAN1 sound buon lights up, and the seing

(on) appears in the display.

2. Selecttheon/oseingwiththeUPorDOWNbut-

tonbesidethedisplay.

Specifying the volume balance for layers

The volume balance for sounds in the Layer mode (or the

Partner mode) can be adjusted. The seing range is 1 – 9...

9 – 9...9 – 1, with the number on the le for layer 1 (or the

le side of the keyboard) and the number on the right for

layer 2 (or the right side of the keyboard).

The default seing is 9 – 9.

1. EntertheFunctionmode,andthenpresstheE.PIANO2

buon.

The E.PIANO2 sound buon lights up, and the balance

seing (9 – 9) appears in the display.

2. SpecifythevolumebalancesettingwiththeUPor

DOWNbuonbesidethedisplay.

To return to the default setting, simultaneously press

the UP and DOWN buons.

If the sound is in the Single mode, – – – appears in the

display, and a seing cannot be specied.

Specifying layer octaves

In the Layer mode, the octave for each sound can be speci-

ed. The seing range is ±1 octave for each sound, and –01,

00 and 01 appear in the display. The default seing is 00.

1. EntertheFunctionmode,andthenpresstheHARP-

SI/CLAVbuon.

The HARPSI/CLAV sound button lights up, and the

layer (L1) whose octave is to be specied appears in the

display.

2. SelectthelayerwiththeUPorDOWNbuonbeside

thedisplay.

L1 appears for layer 1, and L2 appears for layer 2.

3. PresstheBANKbuon.

The octave seing (00) appears in the display.

4. SelecttheoctaveseingwiththeUPorDOWNbut-

tonbesidethedisplay.

To return to the default setting, simultaneously press

the UP and DOWN buons.

To select the octave for the other layer, press the HARPSI/

CLAV buon to select the layer.

2,4

If the sound is in the Single mode, – – – appears in the

display, and a seing cannot be specied.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 70 71

Comments to this Manuals

No comments

Korg LP-380-73 User Manual Page 13

Comments to this Manuals

Related products and manuals for Musical Instruments Korg LP-380-73